实心锥形方形喷嘴设计特点：

G-SQ﹨H-SQ系列喷组ID特点是能产生实心锥形喷雾形状，喷射区域呈正方形，喷流角度为40-105°；G-SQ﹨H-SQ系列喷组能在大范围的压力和流率下产生分布均匀，液滴大小中等到偏大的喷雾；这种均匀的喷雾分布来源于独特的页片设计。大而通畅的流道和***的喷流控制特性。这种喷嘴非常适合安装在要求***覆盖的矩形喷雾区域的地方；

Solid tapered square nozzle design features:

G - SQ ﹨ H - SQ series spray group ID feature is to produce solid spray cone shape, the injection area is square, jet Angle of 40-105 °;G - SQ ﹨ H - SQ series can spray group in a wide range of pressure and flow rate under the uniform distribution, droplet size medium to large spray;The uniformity of spray distribution is derived from the unique page design.Big and smooth flow and advanced spray flow control characteristics.The nozzle is very suitable for installation in rectangular spray area covered by demanding a thorough;

空心喷嘴喷雾特性及用途：

偏转系列空心喷嘴结构简单，喷雾均匀，使用方便；主要适用于炼钢厂小方坯连铸机的二次冷却。同时也能够用于气体的清洗，冷却水处理，产品去污、喷湿、海水喷洒等。

喷嘴连接螺纹为

3/8               A             B                C

1/2               28           31              17

3/4               33           37              22

11/2             60           67              50

喷嘴材质为不锈钢和黄铜，2205材质为主；

The hollow nozzle spray characteristics and USES:

Deflection series hollow nozzle structure is simple, spray evenly, easy to use;Mainly suitable for steel mills small billet caster of secondary cooling.At the same time can also be used for gas cleaning, cooling water treatment, product decontamination, spray wet, water spray, etc.

Nozzle thread for connection

3/8 A B C

28 31 1/2 17

Three-quarters of 33 37 22

1 1/2 60, 67 50

Nozzle is made of stainless steel and brass, 2205 material is given priority to;

中小流量空心锥形喷嘴A/B

空心喷嘴的一般应用：

洗涤气体的空气，以除去飞尘和其他燃烧产物；

气体冷却；

水冷却；

金属处理；

除去产品上的油渍；

易散灰尘灭尘与控制；

盐水喷流；

水充气；

Washing gas and air to remove fly ash and other combustion products;

Gas cooling;

Water colling;

Metal treating 

Product degreasing;

Suppression and control of fugitive dust;

Brine spraying 

Water areating;

空心喷嘴A/B系列喷嘴更多信息请登录斐卓公司网站，或者致电我司！