空心喷嘴喷雾特性及用途：
偏转系列空心喷嘴结构简单，喷雾均匀，使用方便；主要适用于炼钢厂小方坯连铸机的二次冷却。同时也能够用于气体的清洗，冷却水处理，产品去污、喷湿、海水喷洒等。
喷嘴连接螺纹为
3/8 A B C
1/2 28 31 17
3/4 33 37 22
11/2 60 67 50
喷嘴材质为不锈钢和黄铜，2205材质为主；
The hollow nozzle spray characteristics and USES:
Deflection series hollow nozzle structure is simple, spray evenly, easy to use;Mainly suitable for steel mills small billet caster of secondary cooling.At the same time can also be used for gas cleaning, cooling water treatment, product decontamination, spray wet, water spray, etc.
Nozzle thread for connection
3/8 A B C
28 31 1/2 17
Three-quarters of 33 37 22
1 1/2 60, 67 50
Nozzle is made of stainless steel and brass, 2205 material is given priority to;
液压式雾化喷嘴的特性和优点：
液压式雾化喷嘴无需使用压缩空气，利用液压就能形成非常微细的空心锥形雾化喷雾；
分布均匀，压力和流量试用范围非常广；
***细小的颗粒，形成雾状喷雾效果；
墙上安装型喷嘴可用于外墙，容器和管道；
喷孔嵌体、盘芯及过滤器便于拆卸，以进行检测或清洗。
大多数型号均配备内置的滤网。
The characteristics of hydraulic spray nozzle and advantages:
Without using compressed air hydraulic spray nozzle, a very fine hollow cone can be formed using hydraulic atomized spray;
Pressure and flow uniform distribution, trial range is very wide.
Very small particles to form fog spray effect;
Install on the wall type nozzle can be used for exterior wall, containers and pipes;
Inlay, core plate and the nozzle filter is easy to remove, for testing or cleaning.
Most of the models are equipped with a built-in filter.
窄角实心锥形喷嘴30°和窄角实心锥形15°的设计特点和一般应用：
窄角15°和窄角30°实心锥形喷嘴能产生实心锥形欧恩无形状，喷射区域呈圆形，喷嘴产生的雾滴分布均匀，颗粒较租，这两类喷嘴单位面积的冲击力***高于同样流率下的其他实心锥形喷嘴。
G与GG型窄角实心锥形喷嘴能够拆卸帽盖与叶片，喷嘴均采用棒材制作而成，
窄角实心锥形喷嘴主要应用于：1.需要深度清洗或渗透以确保透彻清洗的产品进行清洗；
2.给高温蒸汽降温；
3.喷射管道的内侧进行冷却和清洗。
