(3)RP低流量中气压雾化方式：RP(Reduced＝降低了的；Pressure＝风帽气压)省漆高效系列喷枪有***的雾化技术，它结合了传统喷枪与HVLP喷枪的优点，其风帽空气压力约在1.2-1.3巴之间；涂料传递效率在65％以上，但耗气量比传统喷枪***(每分钟295升，进气压力2.5巴)，操作上跟传统喷非常接近。
氨水脱硝喷枪的特点：
1、产生平均粒径为70微米 “微雾”的二流体扇形喷嘴。
2、流量调整范围较大，且喷雾角度变动小。
3、喷雾形状全区域内的粒径均匀。
4、流量分布均等，适合于多数喷嘴排列使用，喷射距离远，穿透力强。
5、异物通过径大，不易阻塞。
6、结构简单，便于维护
7、可移动设计，安装拆卸更加方便快捷，大大节省安装、维修工作量。
8、喷枪可采用气缸推进系统，方便喷枪自动推进，延长喷枪使用寿命。
氨水脱硝喷枪主要用途：
1、 脱硝：氨水、尿素等还原剂的喷洒。
2、 冷却：锅炉尾气、铸件等的冷却。
3、 调湿：混凝土、废气加湿。
4、 焚烧：废水、废液的焚烧
The characteristics of ammonia denitration gun:
1, produce the average particle size is 70 microns 'micro fog' two fluid fan nozzle.
2, flow adjustment range is larger, and spray Angle changes small.
3 shape, spray particle size uniform in all area.
4, equal distribution of flow, suitable for most of the nozzle arrangement is used, jet distance, strong penetrating power.
5, foreign body through the diameter is big, not easy to block.
6, simple structure, easy to maintain
7, portable design, easy installation and removal of more quick, save installation, maintenance workload.
8, spray gun cylinder propulsion system can be used for automatic spray gun propulsion, prolong the service life of spray gun.
Ammonia denitration gun main use:
1, denitration: ammonia, urea, such as reducing agent spraying.
2, cooling, boiler exhaust gas, such as casting cooling.
3, wet: concrete, waste gas humidification.
4, burning: waste water, waste burning
Material: 303, 316, 310 stainless steel, alloy
The spray shape: fan product introduction
Ammonia denitration gun ordering information:
Feizhuo - F - SS
斐卓Feizhuo气动式伸缩喷枪性能特点
1、 雾化均匀——喷雾全区域的粒径分布均匀，为液体的均匀蒸发和吸收反应提供了非常优越的***。平均颗粒直径只有60μm，粒径120μm。
2、 运行成本***——低气水比是此款喷枪的优点，长时间使用更能节省运行成本。
3、 气动伸缩装置——喷枪采用气动伸缩装置，喷枪不运行时可以自动退出炉内，易于喷枪的维护，大大延长了喷枪的使用寿命。
4、 流量范围广——流量范围从3L/h—400L/h,可以满足各种流量需求。
5、 使用寿命长——因喷嘴是在低压环境下工作，水压气压都不超过0.6Mpa，所以对喷嘴磨损很小，而喷枪亦可带保护套管，喷嘴置于保护套管内，能够更好保护喷嘴，从而大大延长使用寿命。
角度：20°
流量：0.05-6.67L/min
材质：304、310不锈钢，哈氏合金
喷雾形状：空心锥形、实心锥形、扇形产品介绍
The Fijian zhuo Feizhuo pneumatic telescopic spraying performance characteristics1, uniform atomization, spray the whole area of uniform particle size distribution, provides the uniform liquid evaporation and absorption reaction is very superior.The average particle diameter of only 60 mu m, maximum particle size of 120 microns.
2, lower operation cost, low gas water ratio is the advantage of this spray gun, use for a long time can save running cost more.
3, pneumatic telescopic device, pneumatic telescopic device for the gun, spray gun not runtime can automatically come back inside, easy to spray gun maintenance, greatly extend the service life of the gun.
4, wide flow range - flow range from 3 l/h, 400 l/h, can satisfy all kinds of traffic demand.
5, long service life, because of the nozzle is working under low pressure environment, hydrostatic pressure no more than 0.6 Mpa, so wear of nozzle is small, and the spray gun can protect casing, nozzle inserted in case, can better protect the nozzle, thus greatly extend the service life.
